Development of a mathematical model of an electrohydraulic vehicle control system considering changes in temperature conditions

Rilyakin YG. Obespechenie rabotosposobnosti gidroprivoda mobilnix mashin pri nizkix temperaturax. Penza: PGUAS; 2014.

Badrinarayanan S, Bhinder KS, Kumar VR, Anupprasad. Thermal analysis of hydraulic system of landing gear. IOP Conference Series: Materials Science and Engineering. 2018;402:012100. https://doi.org/10.1088/1757-899X/402/1/012100.

Lu N, Fu Y, Sun X. Digital modeling of double press axial piston pump and its thermal analysis basing on AMEsim. Journal of Beijing University of Aeronautics and Astronautics. 2006;32(9):1055–1058, 1086. Available from: https://www.researchgate.net/publication/ 296530616_Digital_modeling_of_double_press_axial_piston_pump_and_its_thermal_analysis_basing_on_AMEsim.

Yonglin L, Keqiang C, Haojun X, Xinbing S. Thermal-hydraulic modeling and simulation of hydraulic system based on Dymola. Journal of System Simulation. 2010;22:2043–2047. Available from: https://www.researchgate.net/publication/286995860_Thermal-hydraulic_ modeling_and_simulation_of_hydraulic_system_based_on_Dymola.

Chenggong L, Zongxia J. Calculation method for thermal-hydraulic system simulation. Journal of Heat Transfer. 2008;130(8):084503. https://doi.org/10.1115/1.2928006.

Li J, Zhang X, Yin Y, Zhang J. Dynamic temperature simulation of an accumulator in aircraft hydraulic systems. In: Proceedings of 2011 International Conference on Fluid Power and Mechatronics; 2011:653–657. https://doi.org/10.1109/FPM.2011.6045843.

Li Y, Su X, Xu H, Li D. Thermal-hydraulic modeling and simulation of high power hydro-motor. In: 2008 Asia Simulation Conference – 7th International Conference on System Simulation and Scientific Computing; 2008:841–844. https://doi.org/10.1109/ASC-ICSC.2008.4675479.

Li CG, Jiao ZX. Thermal-hydraulic modeling and simulation of piston pump. Chinese Journal of Aeronautics. 2006;19(4):354–358. https://doi.org/10.1016/S1000-9361(11)60340-3.

Li Y, Xu H, Cao K, et al. Efficiency analysis and thermal-hydraulic modeling of aerial piston pump at whole work condition. Journal of Beijing University of Aeronautics and Astronautics. 2010;36(12):1469–1472. (In Chinese). Available from: https://bhxb.buaa.edu.cn/bhzk/en/article/id/11844.

¨Onder M, Bayrak A, Aksoy S. Lyapunov based observer design for electro-hydraulic arm system. D¨uzce ¨Universitesi Bilim ve Teknoloji

Dergisi. 2022;10:773–787. https://doi.org/10.29130/dubited.1000111.

Hutter K, Wang Y. Fluid and thermodynamics, Volume 2: Advanced fluid mechanics and thermodynamic fundamentals. Berlin: Springer; 2016.

Popov AY. Imitasionnoe modelirovanie ob’emnogo gidroprivoda. Traktori i selxozmashini. 2018:45–52. No. 3. (In Russian).

Darsht YA. Imitasionnie modeli gidroapparatov. Avtomatizasiya i sovremennie texnologii. 2005:28–30. No. 3. (In Russian).

Shermukhamedov A, Astanov B, Tojiboev S. Modeling of thermal processes in flow-through hydraulic drives. In: International Scientific Conference Fundamental and Applied Scientific Research in the Development of Agriculture in the Far East. Springer Nature Switzerland; 2023:486–495. https://doi.org/10.1007/978-3-031-36960-5_55.